2.5" RAID SATA Dual HDD/SSD Enclosure, USB 3.2 Gen2
Item No.
EW7077
RAID 0/RAID 1/JBOD mode | USB-C to USB-C cable | USB-C to USB-A cable
- Aluminium RAID enclosure for two 2.5 inch SATA SSDs/HDDs with a max. height of 9.5mm with RAID 0/RAID 1/JBOD/BIG modes
- Perfect for storing your data and securing your data for drive failures
- USB powered; comes with a USB-C to USB-C cable and USB-C to USB-A cable
- UASP support for a higher data transfer speed
- Backwards compatible with USB 3.1 Gen1, 3.0, 2.0
- Comes with a stand, screwdriver and screws
The EW7077 USB-C RAID Dual HDD/SSD Enclosure lets you mount two HDDs or SSD’s with a max. height of 9.5mm in ONE enclosure. This is perfect for securing your data in case of drive failure. The USB-C 3.2 Gen2 enclosure supports RAID 0, RAID 1, JBOD and BIG/SPAN. A USB-C to USB-C cable and USB-C to USB-A cable, standard, screwdriver and screws are enclosed. The EW7077 supports UASP for higher data transfer speed and is backwards compatible with USB 3.2 Gen1, USB 3.1 Gen2, USB 3.1 Gen1, USB 3.0 and USB 2.0.
Protect your data with RAID 1
Store two 2.5 inch SATA SSDs and HDDs (with a max. height of 9.5mm) in the EW7077 USB-C Enclosure. This enclosure supports RAID 0, RAID 1, JBOD, BIG/SPAN. Choose the desired RAID mode by adjusting the DIP switches. Protect your data when a drive gets corrupt by choosing RAID 1 (Mirroring). The fastest read/write option is RAID 0 (Striping). For the biggest capacity you need to choose for JBOD or BIG/SPAN.
SuperSpeed USB 10Gbit/s support
The EW7077 enclosure supports UASP (USB Attached SCSI-Protocol) and SuperSpeed USB 10Gbit/s which enables you to transfer data at a maximum rate up to 10Gbit/s.
Complete solution
Use the enclosed screws and screwdriver to build in the SSDs or HDDs. The enclosure is provided with both a USB-C to USB-C and a USB-C to USB-A cable, a stand and USB power cable.
Protect your data with RAID 1
Store two 2.5 inch SATA SSDs and HDDs (with a max. height of 9.5mm) in the EW7077 USB-C Enclosure. This enclosure supports RAID 0, RAID 1, JBOD, BIG/SPAN. Choose the desired RAID mode by adjusting the DIP switches. Protect your data when a drive gets corrupt by choosing RAID 1 (Mirroring). The fastest read/write option is RAID 0 (Striping). For the biggest capacity you need to choose for JBOD or BIG/SPAN.
SuperSpeed USB 10Gbit/s support
The EW7077 enclosure supports UASP (USB Attached SCSI-Protocol) and SuperSpeed USB 10Gbit/s which enables you to transfer data at a maximum rate up to 10Gbit/s.
Complete solution
Use the enclosed screws and screwdriver to build in the SSDs or HDDs. The enclosure is provided with both a USB-C to USB-C and a USB-C to USB-A cable, a stand and USB power cable.
Description
RAID 0/RAID 1/JBOD mode | USB-C to USB-C cable | USB-C to USB-A cable
- Aluminium RAID enclosure for two 2.5 inch SATA SSDs/HDDs with a max. height of 9.5mm with RAID 0/RAID 1/JBOD/BIG modes
- Perfect for storing your data and securing your data for drive failures
- USB powered; comes with a USB-C to USB-C cable and USB-C to USB-A cable
- UASP support for a higher data transfer speed
- Backwards compatible with USB 3.1 Gen1, 3.0, 2.0
- Comes with a stand, screwdriver and screws
The EW7077 USB-C RAID Dual HDD/SSD Enclosure lets you mount two HDDs or SSD’s with a max. height of 9.5mm in ONE enclosure. This is perfect for securing your data in case of drive failure. The USB-C 3.2 Gen2 enclosure supports RAID 0, RAID 1, JBOD and BIG/SPAN. A USB-C to USB-C cable and USB-C to USB-A cable, standard, screwdriver and screws are enclosed. The EW7077 supports UASP for higher data transfer speed and is backwards compatible with USB 3.2 Gen1, USB 3.1 Gen2, USB 3.1 Gen1, USB 3.0 and USB 2.0.
Protect your data with RAID 1
Store two 2.5 inch SATA SSDs and HDDs (with a max. height of 9.5mm) in the EW7077 USB-C Enclosure. This enclosure supports RAID 0, RAID 1, JBOD, BIG/SPAN. Choose the desired RAID mode by adjusting the DIP switches. Protect your data when a drive gets corrupt by choosing RAID 1 (Mirroring). The fastest read/write option is RAID 0 (Striping). For the biggest capacity you need to choose for JBOD or BIG/SPAN.
SuperSpeed USB 10Gbit/s support
The EW7077 enclosure supports UASP (USB Attached SCSI-Protocol) and SuperSpeed USB 10Gbit/s which enables you to transfer data at a maximum rate up to 10Gbit/s.
Complete solution
Use the enclosed screws and screwdriver to build in the SSDs or HDDs. The enclosure is provided with both a USB-C to USB-C and a USB-C to USB-A cable, a stand and USB power cable.
Protect your data with RAID 1
Store two 2.5 inch SATA SSDs and HDDs (with a max. height of 9.5mm) in the EW7077 USB-C Enclosure. This enclosure supports RAID 0, RAID 1, JBOD, BIG/SPAN. Choose the desired RAID mode by adjusting the DIP switches. Protect your data when a drive gets corrupt by choosing RAID 1 (Mirroring). The fastest read/write option is RAID 0 (Striping). For the biggest capacity you need to choose for JBOD or BIG/SPAN.
SuperSpeed USB 10Gbit/s support
The EW7077 enclosure supports UASP (USB Attached SCSI-Protocol) and SuperSpeed USB 10Gbit/s which enables you to transfer data at a maximum rate up to 10Gbit/s.
Complete solution
Use the enclosed screws and screwdriver to build in the SSDs or HDDs. The enclosure is provided with both a USB-C to USB-C and a USB-C to USB-A cable, a stand and USB power cable.
Specifications
Product category | USB Type-C 2.5 inch drive enclosures |
USB Type-C | Yes |
Drive format | 2.5 inch |
Drive interface | SATA |
Disk Bays | 2 |
Screwless | No |
Enclosure material | Aluminum |
Colour | Black |
Computer connection | USB A male (x1), USB C male (x1) |
Supported features | Clone, RAID, UASP |
USB version | USB 3.2 Gen 2 - SuperSpeed 10Gbit/s (USB 3.1) |
Data transfer rate | 10 Gbps |
Power supply | External power supply, USB powered |
Warranty (years) | 5 |
EAN code | 8054392618444 |
Downloads